Epson LX-300+ Reference Guide

12 Paper Handling
Printing with the push tractor
Follow these steps to load continuous paper on the push tractor:
1. Turn off the printer.
2. Remove the printer cover and the paper guide, and pull the
paper release lever forward to the continuous paper
position.
3. Unlock the sprockets on the tractor by pulling the blue lock
levers forward.

Epson LX-300+ Specifications

General

Emulation	Epson ESC/P, IBM PPDS
Print Method	9-pin, impact dot matrix
Interface	Parallel
Paper Handling	Friction feed
Dimensions	366 x 275 x 159 mm
Paper Width	4 - 10 inches