Epson LX-300+ - Installing EPSON Status Monitor 3

44 Using the Printer Software
Installing EPSON Status Monitor 3
If you need to install Status Monitor 3, you can either download
it from Epson’s web site; or if you have the Printer Software
CD-ROM, you can follow these steps:
1. Make sure the printer is off and Windows is running on
your computer.
2. Insert the Printer Software CD-ROM in the CD-ROM or
DVD drive. After a moment, you see the EPSON Installation
Program screen.
3. Close the Installation Program window.
4. Open the CD-ROM folder and double-click the ENGLISH
folder.
5. Double-click STM3 and then STMSETUP.EXE.
6. Make sure the EPSON LX-300+II icon is selected and click
OK.
The Status Monitor 3 files are installed.