EPSON Perfection 1670 Photo/Perfection 1270 Revision B
DISASSEMBLY/ASSEMBLY Disassembly Procedure 22
11.
Remove the Carriage Shaft from the rear side Bushing of the Lower Housing.
12. Draw the Carriage Shaft out of the Lower Housing's front side Bushing and the
Carriage Unit, and remove the Carriage Unit.
Figure 2-18. Removal of Carriage Unit
C A U T I O N
When removing the Carriage Shaft, fully be careful not to scratch the
Carriage Shaft and the Gears on the rear side of the CR Motor.
Front side Bushing
Carriage Shaft
Step 11
Step 12-2)
Step 12-1)
Rear side Bushing
To Next Page
Loading...
