21
Connecting to Video Equipment
For Component Video (DVD, Video games)
For RGB Video
Playing sound from video equipment
Volume adjustment
Press [l] or [r] on the remote control.
You can also adjust the volume with the configuration menu.
([Menu] button → “Setting” → “Volume”) See “
Setting menu” on page 39.
p
After projection starts, change the “Input Signal” setting in the “Image”
menu to either “Component Video (YCbCrg)” or “Component Video
(YPbPr
g)” to match the signals from the video equipment. s P.36
p
• After projection starts, change the “Input Signal” setting in the
“Image” menu to “Computer.” s P.36
• For an RGB connection, a commercially available adapter or converter
cable may be required.
To component
video out port
Component video
cable (optional)
To Computer/
Component Video port
Computer cable
(accessory)
To Computer/
Component Video port
To RGB out port
p
When using computer and video equipment alternately, swap the cable or
use an audio switch.
AV cable (red/white)
(commercially available)
To Audio portTo audio out port
To Next Page
Loading...
Need help?
General