31
Functions for Enhancing Projection
Projecting in widescreen (changing aspect ratio)
This function changes the Aspect ratiog of images from 4:3 to 16:9 when
component video images (YCbCr and YPbPr) or video images (S-Video or
composite video) are being projected. Images which have been recorded in
digital video or onto DVDs can be viewed in 16:9 wide-screen format.
Press the [Aspect] button on the remote control
to change the screen size as follows:
E-Zoom
The image is enlarged or reduced.
1 Press the [E-Zoomz] button on the
remote control.
A target scope is displayed on the screen.
2 Press the [u][d][l][r] buttons to move
the target scope to the center of the part you wish to enlarge/
reduce.
3 Push [E-Zoomz] to enlarge the image. Push
[E-Zoomx] to reduce the enlarged image.
• [E-Zoomz]: Enlarges part of the image without changing the size
of the projection area.
• [E-Zoomx]: Reduces the part of the image that has been enlarged
using the [z] button.
• You can scroll with the [u][d][l][r] buttons.
• Press [Esc] to cancel.
When images in Squeeze
modeg are projected at 4:3
When images in Squeeze
mode are projected at 16:9
target scope
enlargement ratio
To Next Page
Loading...
