The Computer Will Not Start
The power light is on, but the computer does not start.
Place a bootable diskette in drive A and turn on the computer
again.
Caution
If you turn off the computer, always wait at least 20 seconds
before turning it back on. This prevents damage to the
computer’s electrical circuitry.
The
computer does not start
and the power light is not lit.
Make sure the power cord is securely connected to both the AC
inlet on the back panel and an electrical outlet.
The power cord is securely connected, but the computer
still does not start.
Check the electrical outlet for power. Turn off your computer
and unplug the power cord. Plug a lamp into the outlet and
turn it on.
You
installed
or removed system components,
and
now
your computer does not start.
Check to make sure you have reconnected all the internal and
external cables correctly.
You may have installed a SIMM incorrectly. If the system
doesn’t detect memory, it won’t start. Check that your SIMM(s)
are securely installed in their sockets.
Troubleshooting 5-3
To Next Page
Loading...
Need help?
General