SETUP lets you verify or change the following:
Current date and time
Type of diskette drive(s) and hard disk drive(s)
System memory
Video display type
Keyboard options
Processor speed
Internal cache function
Shadow options
Processor chip features
Green PC features.
SETUP is stored in the computer’s ROM BIOS, so you can run it
any time. The configuration information is stored in an area of
memory called CMOS RAM. This memory is backed up by a
battery so it is not erased when you turn off or reset the
computer.
Stating the SETUP Program
You can run SETUP whenever you turn on or reset your
computer. After performing power-on diagnostics, your
computer displays the following prompt:
Press F2 to run the setup utility
To start SETUP, press F2.
1-10 Setting Up Your System
To Next Page
Loading...
Need help?
General