Epson RC700 - Page 202

Maintenance 9. Troubleshooting
190 RC700 / RC700-A Rev.23
No. Message Remedy Note 1 Note 2
2142
DU Initialization t Error.
Failed to initialize drive units.
Check the connection with drive
units.
2143
DU Initialization Error.
Timeout during initialization of drive
units.
Check the connection with drive
units.
2144
DU Initialization Error.
No data to download to drive units.
Reboot the control unit and drive
units.
2145
DU Initialization Error.
Failed to start communication with
drive units.
Reboot the control unit and drive
units.
2146
DU Initialization Error.
Timeout when starting
communication with drive units.
Reboot the control unit and drive
units.
2147
DU Initialization Error. Failed to
update the drive units software.
Review the software update setting.
Check the connection with the Drive
Unit.
2148
DU Initialization Error. Failed to
update the drive units software.
Check the file name.
Check the update file.
2149
DU Initialization Error. Failed to
update the drive units software.
Check the Drive Unit power and
connection.
Reboot the Controller.
2150
Operation failure.
Task number cannot be found.
Reboot the Controller.
2151
Operation failure.
Executing the task.
Reboot the Controller.
2152
Operation failure.
Object code size failure.
Reboot the Controller.
2153
Operation failure.
Jog parameter failure.
Reboot the Controller.
2154
Operation failure.
Executing jog.
Reboot the Controller.
2155
Operation failure.
Cannot execute the jog function.
Reboot the Controller.
2156
Operation failure.
Jog data is not configured.
Reboot the Controller.
2157
Operation failure.
Failed to change the jog parameter.
Reboot the Controller.
2158
Operation failure.
Failed to allocate the area for the
break point.
Reboot the Controller.
2159
Operation failure.
Break point number is beyond the
allowable setup count.
Reduce the break points.
2160
Operation failure.
Failed to allocate the function ID.
Reboot the Controller.
2161
Operation failure.
Failed to allocate the local variable
address.
Reboot the Controller.
2162
Operation failure.
Not enough buffer to store the local
variable.
Review the size of the Local variable.
2163
Operation failure.
Value change is available only
when the task is halted.
Halt the task by the break point.