Epson SC-F10000 Series

C
Take out the ink supply outlet from inside and fix
it as shown in the illustration.
D
Remove tape from the surface of ink supply
outlet.
E
Place the ink cartridge with the ink supply outlet
facing the side, and slide the ink cartridge back
and forth longitudinally within the range of
approximately 10 cm for ten times.
Move the ink cartridge at a rate of one
back-and-forth cycle per second.
❏ When using 10 L ink cartridge
❏ When using 3 L ink cartridge
SC-F10000 Series User's Guide
Maintenance
119