Epson SC-F10000 Series User Manual

U “Removing the Loaded Media” on page 87
S
On the left side, raise the center adjuster so it is
higher than the caster.
(1) Turn the top nut clockwise to move it
downward.
(2) Turn the bottom nut counter-clockwise until
the adjuster is higher than the caster.
T
On the left side, raise the front and back adjusters
so they are higher than the casters.
(1) Turn the top nut clockwise to move it
downward.
(2) Turn the bottom nut counter-clockwise until
the caster touches the floor.
(3) Continue to turn it counter-clockwise until the
adjuster is higher than the caster.
The metal plates under the adjusters are used for
installing the printer after moving it, so do not
throw them away.
SC-F10000 Series User's Guide
Appendix
183

Epson SC-F10000 Series Specifications

General

Brand	Epson
Model	SC-F10000 Series
Category	Printer
Language	English