Settings item Setting/Additional Explanation
Head Cleaning Cleans the selected color.
Only run this when the nozzles are clogged.
U “Cleaning the print head” on page 116
Power Cleaning Cleans the selected color.
Only run this when you cannot clear the clogged nozzles even after
repeating normal print head cleaning several times.
U “Cleaning the print head” on page 116
Remove Paper Removes any scraps of paper that remain inside the printer.
Ink Cartridge(s) Replacement Displays the amount of ink remaining and the model number for the
cartridge.
Touch How To... to view the replacement instructions on the screen.
Replace Maintenance Box Displays the amount of free space remaining and the model number of the
maintenance box.
Touch How To... to view the replacement instructions on the screen.
Replace Cutter You can replace the cutter.
Touch How To... to view the replacement instructions on the screen.
Adjust Cut Position -3.0 to +3.0 mm
SProofer Setting This is only displayed when a SpectroProofer is installed.
Cleaning the Maintenance Parts
Wiping the Print Head You can clean the print head.
Touch Start to move the print head to the cleaning position.
Wiping around the Cap You can clean around the caps.
Touch Start to move the print head to the cleaning position.
Keeping/Transporting Preparation
Keeping Preparation
Touch Start to discharge ink.
When the ink has been discharged, the printer is automatically turned off.
Personal Transport Preparation
Touch Start to discharge ink.
When the ink has been discharged, the printer is automatically turned off.
Language
You can select the language displayed on the panel. Select from the following languages.
Dutch, English, French, German, Italian, Japanese, Korean, Portuguese, Russian, Simplified Chinese, Spanish,
Traditional Chinese
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
113
To Next Page
Loading...
Need help?
General