Status
Settings item Setting/Additional Explanation
Firmware Version Displays the firmware versions for the printer, Adobe PS3 expansion unit,
SpectroProofer mounter, ILS30EP, and the auto take-up unit.
Hard Disk Unit Displays the connection status for the hard disk unit.
Adobe PS3 Expansion Unit Displays the connection status for the Adobe PS3 expansion unit.
SpectroProofer Calibration Tile S/N, Device Temperature, Air Temperature, Backing Color
This is only displayed when a SpectroProofer is installed.
Auto Take-up Reel Unit Only displayed when the auto take-up reel unit is installed.
Platen Gap Value for Last Print Job Displays the platen gap value the last time printing was performed.
Network You can display the LAN connection status and print a status sheet.
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
114
To Next Page
Loading...
General