Banner printing (on roll
paper)
You can print banners and panoramic pictures if you
create and set print data for banner printing in your
application.
There are two ways to print a banner.
Printer Driver Source Supported Applications
Roll Paper Document preparation
software, image editing
software, and so on
*
Roll paper (Banner) Applications that support
banner printing
* Create print data at a size supported by the given
application while maintaining the printing length
and width ratio.
See the following for available paper sizes.
U “Printing at Non-Standard Sizes” on page 86
Making Settings in Windows
A
In the printer driver's Main screen, select Media
Type.
U “Printing (Windows)” on page 43
B
Select Roll Paper or Roll Paper (Banner) from
the Source list.
Note:
❏ You can only use Roll Paper (Banner) for
applications that support banner printing.
❏ Selecting Roll Paper (Banner) sets the top and
bottom margins of the paper to 0 mm.
C
Click User Defined and match the paper size to
the size of the data if necessary.
Note:
If you are using applications that support banner
printing, you do not need to set User-Defined
Paper Size if you select Roll Paper (Banner) as the
Source.
SC-P9500 Series/SC-P7500 Series User's Guide
Printing Varieties
89
To Next Page
Loading...
General