Epson SC-S70600 Series User Manual

SC-S30600 series
BK : Black
Y : Yellow
M:Magenta
C:Cyan
F Waste ink bottle status
Displays the approximate amount of space available
in the waste ink bottle. The display changes as shown
below when the waste ink bottle is nearly full or an
error occurs.
Normal Warning or error
1
1 Status indicators
The status of the waste ink bottle is shown as fol‐
lows.
: No error. The indicator changes to
show the amount of space available.
: The waste ink bottle is almost full.
Ready a new waste ink bottle.
: The waste ink bottle is full. Replace
with a new waste ink bottle.
G Media rise detection status
This is displayed by the SC-S50600 series only.
: The printer checks whether the media
rises during printing.
: The printer does not check whether
the media rises during printing.
U “The Maintenance Menu” on page 151
H Additional print drying system status
This display shows settings for the additional print
drying system (supplied with the SC-S50600 series;
optional with other models).
No icon : Not installed, or it is not installed
correctly.
: The drying fan is enabled.
: The drying fan is not enabled. To start
the fan, select Additional Dryer for
On in the setup menu.
U “Heating & Drying” on page 89
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Introduction
23

Epson SC-S70600 Series Specifications

General

Brand	Epson
Model	SC-S70600 Series
Category	Printer
Language	English