I
When loading banner media, attach three
counter weights to both ends of the tensioners.
c
Important:
❏ Always attach three each on the left and right.
Take-up will not be performed correctly if
counterweights are added to one side only or
the quantities are different on the left and
right.
❏ For media other than banner media, always
remove the counterweights before printing.
Failure to do so may cause the print head to
strike the media during printing.
To remove counterweights, open them in the
same way as when attaching them.
EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Basic Operations
75
To Next Page
Loading...
