Item Description
Reset HP-GL/2 Settings Yes
If Yes is selected, the HP-GL/2 Settings are restored to default values.
No
Restore Settings
Description
Yes
If Yes is selected, the Printer Setup is restored to default values.
No
Option Setup
*4
PS3 Expansion Unit
Item Description
Version The supported PostScript version and the latest version for processable PDF files are displayed.
If the PDF version displayed in the document properties of the PDF file is the same or earlier than
the version displayed here, the file can be processed.
PS Status Sheet
If the Z button is pressed, the information of the Adobe PostScript 3 Expansion Unit is printed.
Output Size Auto Select the size of the paper used for printing.
When Auto is selected, the printer prints using the size of the print
data. The actual output size depends on the margin settings.
When a standard size or User Defined is selected, all print data is
enlarged or reduced to the selected paper size and then printed.
The sizes that can be selected vary with the printer model.
When print data is created with the paper size set to A4, the fol-
lowing settings have the described results.
Auto: data is printed with margins added outside the A4 size.
A4: data is printed with the A4 data reduced to the printable area
of the A4 size.
A Series (A4
*
)/US-ANSI/
US-ARCH/B Series/Photo
Series/Others
User Defined
Quality Speed Choose Print Quality in view of image quality and print speed.
Normal
*
Fine
Color Mode
Color
*
Specify whether to print in color or switch to black and white and
then print. Depending on the paper type specified on the printer,
the setting is not displayed. When you are using the SC-T7200D
Series/SC-T5200D Series, the setting depends on the paper type of
the roll paper currently in use.
Grayscale
Dot Correction On This setting is displayed only when the paper type is set to Sin-
gleweight Matte Paper and Plain Paper.
When you are using the SC-T7200D Series/SC-T5200D Series, the
setting depends on the paper type of the roll paper currently in
use.
If lines printed with CAD programs or similar programs have gaps
or smudges, you may be able to reduce them by setting On.
Off
*
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
156
To Next Page
Loading...
Need help?
General
