EPSON Stylus C50/C60/C61/C62 Revision C
PRODUCT DESCRIPTION PANEL CONTROL 23
1.4.3 Printer Condition and Panel Status
" - " : Indicator status don't change.
" A -> B " :A is a indicator condition when carriage is in Home Position.
B is a indicator condition in Ink exchange sequence.
*1: See 1.4.4 "Error Status" for detailed information.
Blink : On 0.5sec + Off 0.5sec
Blink2 : On 0.2sec + Off 0.2sec + On 0.2sec + Off 0.4sec
1.4.4 Error Status
Ink end
When the printer runs out the most amount of the ink of any one color, it indicates
ink low and keeps printing. When the printer runs out the whole ink of any color, it
stops printing and indicates ink end error. User is then requested to install a new
ink cartridge in this state.
Paper out error
When the printer fails to load a sheet, it goes into a paper out error.
Paper jam error
When the printer fails to eject a sheet, it goes into a paper jam error.
No ink cartridge
When the printer detects that ink cartridge comes off, or failed to read or write
CSIC data, it goes into this error mode.
Maintenance request
When the total amount of ink wasted through cleanings and flushing reaches to the
limit, printer indicates this error and stops. In such a case, the absorber in the
printer enclosure needs to be replaced with new one by a service person.
Fatal errors
Carriage control error.
Table 1-18. Printer condition and LED status
Printer status
Indicators
Priority
Power Error
Power ON condition On - 10
Ink sequence Blink - 6
Ink Cartridge change mode Blink - 5
Data processing Blink - 9
Paper Out *1 - On 4
Paper jam condition *1 - On 3
Ink end (Black) *1 - On -> Blink 8
Ink level low (Black) - Blink-> Blink 8
Ink end (Color) *1 - On -> Blink2 8
Ink level low (Color) - Blink-> Blink2 8
Ink end (Black and Color) - On -> On 8
No Ink Cartridge
(Black or Color) *1
- On 7
Maintenance request
(Ink Overflow Counter
error) *1
Alt Blink Alt Blink 2
Fatal error *1 Off On 1
Special setting Blink2 Blink2 -
To Next Page
Loading...
Need help?
General