Epson Stylus Color 440

EPSON Stylus COLOR 440, 640, and 740 Chapter 4 Disassembly and Assembly
91
4.2.1 Removing the Housing
The printer does not have a lower housin
g
. Therefore, the printer
mechanism is full
y
exposed after
y
ou remove the upper housin
g
.
1. Open the printer cover and turn the PG ad
j
ustment lever towards
the + side
(
toward the rear
)
.
2. Take out the 4 screws
(
No. 2
)
securin
g
the housin
g
, and lift the
housin
g
up to remove it.
Figure 4-2. Removing the Housing
CAUTION
Be careful not to catch the housing on the ink cartridge
clamps. If you release a clamp, it could cause air to
invade the ink cartridge.
(No.2)
Housing