Setting Up Your Printer on a Network 7-9
R4C706
long.bk Rev. C
A5 size NETWK.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
10. On the Ports menu, make sure that the new port is included
in the list and that the corresponding check box is selected.
Click OK to close the printer software.
For Macintosh Users
This section tells you how to set up the printer so that you can use
it on an AppleTalk network. By setting up your printer as a shared
printer, your local printer is connected to the network and can be
used by other computers.
First, you need to set up the printer as a shared printer on the
computer to which the printer is connected. Next, specify the
network path to the printer from each computer that will use it,
and install the printer software on those computers.
To Next Page
Loading...
