10-16 Troubleshooting
R4C706
long.bk Rev. C
A5 size TRBLE.FM
7/19/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
❏ Make sure that the Media Type setting in your printer
software is correct. For instructions, see “Making the Media
Type setting” on page 5-3 for Windows or “Making the Media
Type setting” on page 7-121 for Macintosh.
❏ Select Automatic as the Mode setting on your printer
software’s Main menu (Windows) or in the Print dialog box
(Macintosh) and then move the slider to Speed.For
instructions, see “Using the Automatic mode” on page 5-10
for Windows or “Using the Automatic mode” on page 7-127
for Macintosh.
❏ Close any unnecessary applications.
Paper Does Not Feed Correctly
If one of the following problems has occurred, try the solution(s)
listed for that problem.
❏ Paper does not feed
❏ Multiple pages feed
❏ The paper jams
❏ Paper is not ejected fully or is wrinkled
Paper does not feed
Remove the stack of paper and make sure of the following:
❏ The paper is not curled or creased.
❏ The paper is not too old. See the instructions that came with
the paper for more information.
To Next Page
Loading...
