Troubleshooting 10-15
R4C706
long.bk Rev. C
A5 size TRBLE.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Blank pages print
Try one or more of these solutions:
❏ Make sure that your printer and printer driver are
appropriately selected.
❏ Check the settings on the Paper menu (Windows) or in the
Page Setup dialog box (Macintosh). Make sure the settings are
appropriate for the paper size you are using.
❏ Run the Head Cleaning utility to clear any clogged nozzles.
See “Cleaning the Print Head” on page 9-4.
Aftertrying oneor more of these solutions, run a printeroperation
check to check your results. See “Running a printer operation
check” on page 10-7 for details.
Printout has smears on the bottom edge
Try one or more of these solutions:
❏ If the paper is curled toward the printable side, flatten it or
curl it slightly in the opposite direction.
❏ Set the adjust lever to the “+” position, and clear the High
Speed check box in your printer software’s Advanced dialog
box. The Advanced dialog box is accessible through the Main
menu (Windows) or the Print dialog box (Macintosh) when
Custom is selected as the Mode setting. To turn this option
off, you may also need to change the Print Quality setting.
Printing is too slow
Try one or more of these solutions:
To Next Page
Loading...
