Epson Stylus Photo 895 - Chapter 4 Using Roll Paper; Using the Roll Paper Holder; Loading the Roll Paper

Using Roll Paper 4-9
R4C706
long.bk Rev. C
A5 size ROLL.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Chapter 4
Using Roll Paper
Using the Roll Paper Holder
With the roll paper holder mounted on the printer, you can print
in roll paper format, which is convenient for banner printing.
When you are printing using the roll paper holder, keep the
following in mind:
❏
Loadthepaperprintablesideup.
❏
Use flat, undamaged paper. If the paper is curled, flatten it
before loading to avoid paper feeding problems.
❏
Always handle the paper by the edges.
❏
Provideamplespaceinfrontoftheprinterforthepaperto
eject fully.
❏
Make sure that the output tray is down and the output tray
extension is closed.
❏
Check that the end of the paper is cut cleanly, perpendicular
to the long axis of the paper. If it is cut on a diagonal or not
cleanly, the paper may not feed smoothly or the print may
extend off the edge of the paper.
❏
EPSON recommends using media distributed by EPSON to
ensure high-quality results.
Loading the roll paper
Follow the directions below to mount the roll paper holder and
load the roll paper.