Troubleshooting 10-23
R4C706
long.bk Rev. C
A5 size TRBLE.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
❏ Use the USB cable (C83623✽) recommended in “System
Requirements” on page A-11.
❏ For best results, you should connect the printer directly to the
computer’s USB port. If you must use multiple USB hubs, we
recommend that you connect the printer to the first-tier hub.
Operating System
Your computer must be a Windows Me, 98 or Windows 2000 pre-
installed model. You may not be able to install or run the USB
PrinterDriveronacomputerwhichisnotequippedwithaUSB
port or which has been upgraded from Windows 95 to
Windows 98 or 2000. For Windows Me users, your computer
must be a Windows Me pre-installed model or upgraded from a
Windows 98 pre-installed model.
For details about your computer, contact your dealer.
Printer software installation
Please note the following.
❏ When using Windows 2000, you must follow the steps in the
Setup Guide to install the printer software, or Microsoft’s
Universal driver may be installed instead. To check if the
Universal driver has been installed, open the Printers folder
and right-click the icon for your printer. To open the printer
driver, click Printing Preferences on the shortcut menu that
appears, then right-click anywhere in the driver. If About is
displayed in the shortcut menu that appears, click it. If a
messageboxwiththewords“UnidrvPrinterDriver”
appears, you must reinstall the printer software as described
in the Setup Guide. If About is not displayed, the printer
software has been installed correctly.
To Next Page
Loading...
