Epson Stylus Photo 895 - Page 171

Troubleshooting 10-25
R4C706
long.bk Rev. C
A5 size TRBLE.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
2. For Windows 98 users, click the Details tab and make sure
that EPUSBx: (EPSON Stylus Photo 895) is displayed in the
Print to the following port list box. For Windows 2000 users,
click the Ports tab and make sure that USBxxx, EPSON Stylus
Photo 895 is displayed in the Print to the following port(s)
list box.
Note:
If the correct port is not displayed, refer to the next section, “Make
sure that EPSON USB Printer Devices appears on the Device
Manager menu (for Windows Me and 98)”.
The Device Manager menu (for Windows Me and 98 only)
If you canceled the plug-and-play driver installation before the
procedure was complete, the USB printer device driver or the
printer software may be incorrectly installed.
Follow the steps below to check the installation and reinstall the
drivers if necessary.
1. Turn the printer on. Plug the USB cable into the printer and
the computer.