A-6 Printer Specifications
R4C706
long.bk Rev. C
A5 size SPEC.FM
7/19/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Note:
Always load paper into the sheet feeder short edge first. Load
envelopes flap edge first with the flap side down.
Diagonal lines show printable area.
A: The minimum top margin is 3.0 mm (0.12").
When loading multiple sheets of EPSON Photo
Quality Glossy Film, the minimum top margin is
30.0 mm (1.2").
B-L: The minimum left margin is 3.0 mm (0.12").
B-R: The minimum right margin is as follows:
3.0 mm (0.12") for single sheets and C6 envelopes.
7.0 mm (0.28") for DL envelopes.
28.0 mm (1.10") for No. 10 envelopes.
C: The minimum bottom margin is 14.0 mm (0.55").
✽
:
✽✽
:
You can extend the minimum bottom margin to 3 mm
by selecting
Maximum
as the Printable Area setting
on the printer software's Paper menu (Windows) or
in the Page Setup dialog box (Macintosh). However,
printquality may decline in the expanded area. Before
printing large jobs using this setting, print a single
sheet to confirm printout quality
.
When printing with the No Margins feature, print
quality may decline in the top and bottom areas of the
printout, or the area may be smeared.
To Next Page
Loading...
