Paper Handling 3-3
R4C706
long.bk Rev. C
A5 size PAPER.FM
7/19/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
❏ Load the media in the sheet feeder, printable side up. See the
instruction sheets packed with the media to determine which
sideistheprintableside.Sometypesofmediahavecut
corners to help identify the correct loading direction, as
shown in the illustration.
Note:
If you extend the printable area by selecting Maximum as the
Printable Area setting in the printer software, the cut corner on
special paper may mar your printout.
❏ Make sure that the paper stack fits under the arrow mark
located on the inside surface of the left edge guide.
❏ If the paper is curled, flatten it or curlit slightly in the opposite
direction before loading. Printing on curled paper may cause
ink to smear on your printout, especially when printing with
Maximum selected as the Printable Area setting.
cut corner
To Next Page
Loading...
