5-24
Printing with Windows
R4C706
long.bk Rev. C
A5 size SOFTW.FM
7/19/01
L
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Copies Select the number of copies that you want to print.
YoucanselectCollatetoprintonesetatatimeor
Reverse Order to print your documents in reverse
order, starting with the last page.
Orientation Select Portrait (tall) or Landscape (wide) to change
the orientation of your printout. To print closer to the
bottom of the page, select the Rotate by 180° check
box.
Printable Area Use this option in the Printable Area Box to adjust the
total area available for printing when sheet Feeder
is selected as the Paper Source setting. This feature
is not available when No Margins or Roll Paper is
selected.
To center the printout, selectCenter. To increasethe
printable area at the bottom edge from 14 mm to
3 mm, select Maximum. Do not select Maximum
while using Premium Glossy Photo Paper.
Note:
The print quality may decline at the edges of the
printout when Maximum is selected as the Printable
Area setting. Before printing large jobs using this
setting, print a single sheet to confirm quality.
When Maximum is selected, make sure that the
paper loaded in the sheet feeder is not curled.
If you select Maximum when printing on Premium
Glossy Photo Paper, your printout may be smeared
in the expanded area (between 14 mm and 3 mm
from the bottom edge).
To Next Page
Loading...
