EPSON Stylus Photo R220/R230 Revision A
TROUBLESHOOTING Unit Level Troubleshooting 20
Table 1-9. Status and Possible Causes of Paper Jam Error
Error Status
LED Indication
STM3 Message
Occurrence
Timing
Carriage Unit
Position
at Power-on
Faulty Unit/Part Name Possible Causes Remedy
Paper Jam Error
Power : --
Paper : Blink
Ink : --
Paper jam or CD/DVD
tray jam
During
operation
Anywhere
PF Motor
The PF Motor Cable is disconnected.
Refer to
Table 1-10
PF Motor failure
The PF Motor Cable is damaged.
ASF Assy. The Extension Spring 0.45 comes off.
PE Sensor
The Torsion Spring, 0.22 for the PE Sensor Lever comes off.
PE Sensor failure
The PE Sensor Cable is disconnected.
The PE Sensor Cable is damaged.
PE Sensor Cable routing failure
C/R Off HP PE Sensor
The Torsion Spring, 0.22 for the PE Sensor Lever comes off.
PE Sensor Cable routing failure
-
ASF Assy. Torsion Spring, 6.45 comes off.
Frame EJ Assy.
The Star Wheel Roller comes off.
The Frame EJ Assy. is deformed (Lower side warpage).
Frame EJ Assy. assembly failure
Holder Shaft, Unit The Torsion Spring, 0.22 for the PE Sensor Lever comes off.
Paper Guide, Front The Porous Pad for borderless print comes off.
Roller EJ Assy.
The Roller EJ Assy. comes off.
The Spur Gear, 41.48 comes off.
Paper Guide, Upper The Paper Guide, Upper comes off.