Epson Stylus Photo R220 - Page 47

EPSON Stylus Photo R220/R230 Revision A
DISASSEMBLY / ASSEMBLY Disassembly 47
 External View
Figure 2-3. Stacker Assy. Removal
 Stacker Assy. Removal
1. Release the left dowel that secures the Stacker Assy. to the Housing, Lower
with a flat-blade screwdriver or similar tool, and remove the Stacker Assy.
toward the front side of the printer.
C A U T I O N
 When removing the Paper Support Assy./Housing (left/right)/
Stacker Assy.
 Be careful not to damage the tabs when releasing them with
a flat-blade screwdriver or your hand to remove the Housing
(left/right) or the Paper Support Assy.
 Do not tilt the printer more than necessary as ink may leak.
 When reinstalling the Paper Support Assy./Housing (left/right)/
Stacker Assy.
 Make sure that there is no gap between the Housing, Frame
and the Housing (left/right).
 Make sure that the right side of the Stacker Assy. is correctly
installed to the damper of the Housing, Lower.
 First secure the Housing, Right with a screw and then secure
the Housing, Left with a screw.
 Make sure that the Paper Support Assy. is correctly installed
to the dowel of the ASF Assy.
Dowel
Left Front of the Printer