Epson Stylus Pro 3800 - Page 138

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 138
 GUIDE, STACKER, RIGHT
1. Install the GUIDE, STACKER, RIGHT so that the two points mentioned below
are securely engaged. See Figure 4-60.
2. Slide the GUIDE, STACKER, RIGHT toward the rear of the printer.
Figure 4-60. Installing the GUIDE, STACKER, RIGHT
Fig. GUIDE, STACKER, RIGHT Main unit
A positioning hole hook
B positioning hole hook
C H E C K
P O I N T
Make sure that the cutout of the GUIDE, STACKER, RIGHT is
aligned with the screw hole on the main frame.
GUIDE, STACKER, RIGHT
A
B