Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 146
8.
Pull out the
GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT
toward you as far
as it will go. See Figure 4-70.
9. Tilt the FRAME, PAPER, EJECT, ASSY in the direction shown in the Figure
4-71. Lift up the right side of the FRAME, PAPER, EJECT, ASSY slightly to pass
it over the bump of the FRAME, ASSY, MAIN as shown in the Figure 4-71.
Figure 4-70. Pulling out the GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT
Figure 4-71. Tilting the FRAME, PAPER, EJECT, ASSY
GUIDE, PAPER GUIDE, BOARD PAPER, RIGHT
FRAME, PAPER, EJECT, ASSY
To Next Page
Loading...
