Epson Stylus Pro 3800 - Product Information; Printer Specifications

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 182
26. Attach acetate tape on the position shown in Figure 4-122 to secure the six FFCs
together.
27. Fold the FFCs back at the position of the cutout of the HOUSING LOWER ASSY,
and wrap acetate tape around the FFCs at the positions shown in Figure 4-123.
28. Insert the folded part of the FFCs into the cutout of the HOUSING LOWER
ASSY.
Figure 4-122. Taping the FFCs
Figure 4-123. Securing the FFCs to the HOUSING LOWER ASSY
20 to 25 mm
FFCs
1. Wrap acetate tape
around FFCs
2. Attach acetate tape on
both sides of FFCs
Cutout
Acetate tape
FFCs
HOUSING LOWER ASSY