Epson Stylus Pro 4900 - Initial Ink Charge Flag

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT Initial Ink Charge Flag 315
Confidential
4.9 Initial Ink Charge Flag
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu ] + [Paper Feed ] + [OK].
2. Start the Service Program and select [Initial Ink Charge Flag].
3. Select ON or OFF and click [Run].
4. Turn the printer OFF.
5. If ON is selected, initial ink charge will be performed next time you start the
printer.
Figure 4-18. [Initial Ink Charge Flag] Screen