Pro 7900 and 9900 Field Repair Guide 10/6/10
Printer Component, Software Item, LCD Display, Printer Button Page 13.
SELF TESTING:
Test:
Version: F/W: (nnnnnnn,n.nn,n.nnnn) (Displays the current firmware version)
Fan: Paper(Duty): (200% - 0%) (Tests the fan suction for all paper suction fans)
Paper1: (Fan test for paper suction fan #1 (Right Side Fan))
Paper2: (Fan test for paper suction fan #2 (Left Side Fan
Paper3: (Fan test for paper suction fan #3 (Left Side Fan))
Error History (list of past errors)
Mecha Adjustment:
Paper: Paper Thick 00, 01, 10, 11(Displays the output from the Paper Thickness Sensors)
RearAD: [Enter]Start (nnn nnn nnn) (For adjusting the Rear Paper Sensor)
Selector Check: [Enter]Start (Tests the PK/MK Valve Motor and Sensor)
APG Check: [Enter]Start (Tests the Auto Platen Gap Motor and Sensor)
PF Ageing: Variable Mode, Aging 400, Aging 12 (Excercises the Paper Feed Motor and Encoder)
CR Ageing: [Enter]Start (Excercises the Carriage Motor and Encoder)
Cleaning PG: Adjustment, Check (Measures the gap between the Nozzle Plate and the AID Grid)
Decomp: [Enter]Start
MK Nozzle/Alignment: (Nozzle check using Matte Black plus all other colors)
Output Pattern: [Enter]Print
Output Alignment: [Enter]Print
Cleaning CL1: [Enter]Start
Cleaning CL2: [Enter]Start
Cleaning CL3: [Enter]Start
PK Nozzle/Alignment: (Nozzle check using Photo Black plus all other colors)
Output Pattern: [Enter]Print
Output Alignment: [Enter]Print
Cleaning CL1: [Enter]Start
Cleaning CL2: [Enter]Start
Cleaning CL3: [Enter]Start
IM Sensor Gap: [Enter]Un Cap
To Next Page
Loading...
