c
Important:
If the right holder handle shaft is not visible,
rotate the holder forward until it stops. The
media can not be properly loaded if the handle
shaft is not visible.
C
Place the media on a lifter oriented according to
how it is rolled (see below) and move the lift to
position the media as indicated by the mark on
the label.
Printable side out
Printable side in
If the label does not have the loading position,
mark it on the label as instructed in the Setup
Guide supplied with the optional heavy roll
media system.
U Heavy Roll Media System Setup Guide
Note:
Be sure the option selected for Roll Type in the
Customize Settings menu matches how the media is
rolled. Roll Type defaults to Printable Side Out. Be
sure to select Printable Side In after loading media
rolled printable side in.
For more information see U “Roll Type” on
page 44
SC-S30600 Series User's Guide
Basic Operations
28
To Next Page
Loading...
