Epson SureColor T-Series - Page 130

Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
130
Printer Status Firmware Version xxxxxxx,x.xx,xxxx
Option Status Displays the options connected.
Show Total Prints XXXXXX m
2
Print Status Sheet Press Z to start printing.
Network Setup IP Address Setting Auto -
Panel IP Address, Subnet Mask, Default Gateway
IPv6 Setting Enable, Disable
IPsec Setting Enable, Disable
PSK Setting Set key at 20 characters or less (half-size characters or
symbols)
IEEE802.1x Setting Enable, Disable
HTTPS Redirect Setting Enable, Disable
Print Status Sheet Press Z to start printing.
Restore Settings Yes, No
Power Settings Sleep Mode 5 to 210 minutes
Power Off Timer Off, 1 to 24 hours
Restore Settings Yes, No
Preference Language Lists the supported languages.
Unit: Length m, ft/in
Alert Lamp Setting On, Off
Administrator
Menu
Change Password Enter a password.
Operational
Control
Network Setup Password Required, No Password Required
Power Cleaning
Manage HDD
*3
Format Hard Disk Yes, No
Printer Mode Auto, PostScript
*4
, HP-GL/2
Date And Time MM/DD/YY HH:MM
Time Zone Enter the time difference between GMT and the current
time zone.
Reset PS Settings
*4
Yes, No
Reset All Settings Yes, No
Menu item Description