244
You see a screen like this:
3. Tap the adjustment value area to adjust the value directly, or use the +/- buttons to change the
value.
The adjustment value is calculated using the following formula:
[Length of Original]/[Length of Print Result]×100-100 with the result rounded at the second
decimal.
For example, if the length of the original is 50 cm, and the print result is 50.1 cm, the formula would
look like:
50 / 50.1 × 100 - 100 = -0.1996 rounded to -0.2
You would enter -0.2 as the adjustment value.
4. Select OK to enter the value.
Parent topic: Solving Scanning Problems (SureColor T5470M)
Uninstall Your Product Software
If you have a problem that requires you to uninstall and re-install your software, follow the instructions for
your operating system.
Uninstalling Product Software - Windows
Uninstalling Product Software - Mac
Parent topic: Solving Problems
To Next Page
Loading...
Need help?
General