Epson SureLab D3000 - Double Roll Administrator's Guide

Settings/Maintenance
15
Settings/Maintenance
You can perform maintenance operations such as Print Head Unit cleaning and calibration, as well as manage
settings.
Performing Maintenance
You can select each maintenance function on the Settings/Maintenance screen.
When performing maintenance in Settings/Maintenance, make sure that the p light on the printer's Operation
panel is on before starting operations.
A
Select the printer you want to use from the Registered Printer List, and then click Settings/Maintenance.
Tip:
O In the following situations, the Settings/Maintenance button is unavailable.
O When the cable connected to the printer is disconnected
O When the printer's Power switch is off
O When the printer's pre-operation check is not complete
O The Settings/Maintenance screen opens when you click Settings/Maintenance on the Printer Information
screen.

Epson SureLab D3000 - Double Roll Specifications

General

Max Print Resolution	1440 x 1440 dpi
Number of Ink Colors	6
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta
Connectivity	USB 2.0, Ethernet
Print Technology	Inkjet
Max Print Size	12 x 48 inches
Print Speed (4x6)	360 prints per hour
Roll Media Width	4", 8", 12"