Epson SureLab D3000 - Double Roll Administrator's Guide

Settings/Maintenance
21
Settings for Optional Equipment
Click Settings for Optional Equipment (012) from System Operation Settings/Inspections (01) to display the
screen. Make settings for optional equipment that has been installed.
After changing settings, click Apply to apply the changes.
Item Explanation
Back Printing Unit Attached/Not
Attached
Displays the installation status for the back printing unit.
Print Density
Control
(Head 1/Head 2)
Adjust the print density for the back printing unit heads in seven levels.
This can be set when the back printing unit is Attached.
Select Roll Paper Select the roll paper feeder you want to use for the test print.
This can be selected when the back printing unit is Attached and paper is
loaded.
Paper Surface Type Displays the Paper Surface Type of the paper loaded in the roll paper
feeder.
"-" is displayed when roll paper is not loaded.
Test Print Click to perform a test print.
This can be performed when the back printing unit is Attached and the
roll paper feeder is selected.
This cannot be performed when the Paper Surface Type does not
support back printing.

Epson SureLab D3000 - Double Roll Specifications

General

Max Print Resolution	1440 x 1440 dpi
Number of Ink Colors	6
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta
Connectivity	USB 2.0, Ethernet
Print Technology	Inkjet
Max Print Size	12 x 48 inches
Print Speed (4x6)	360 prints per hour
Roll Media Width	4", 8", 12"