Epson SureLab D3000 - Double Roll Administrator's Guide

Settings/Maintenance
27
CR Unit Adjustment/Maintenance
In CR Unit Adjustment/Maintenance (03) on the Settings/Maintenance screen, you can perform Head Cleaning
(031) and Color Calibration (034).
When performing maintenance in Settings/Maintenance, make sure that the p light on the printer's Operation
panel is on before starting operations.
Head Cleaning
This function allows you to check for clogging in the print head, and to clear any clogged nozzles. If printing is
performed while nozzles are clogged, there may be streaks in the prints or there may be a difference in color. If you
notice any of these problems, follow the instructions on the next page to perform Head Cleaning (031).
The following two menus are available in Head Cleaning (031).
Auto Cleaning (0311) A sensor inside the printer checks
for any clogged nozzles and
performs head cleaning
automatically if clogging is
detected.
Nozzle Check (0312) You can specify the clogging
detection method and the
cleaning method. Perform a
nozzle check if the situation has
not improved after performing
Auto Cleaning (0311).

Epson SureLab D3000 - Double Roll Specifications

General

Max Print Resolution	1440 x 1440 dpi
Number of Ink Colors	6
Ink Colors	Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta
Connectivity	USB 2.0, Ethernet
Print Technology	Inkjet
Max Print Size	12 x 48 inches
Print Speed (4x6)	360 prints per hour
Roll Media Width	4", 8", 12"