1-4 Product Overview Rev. A
1.2.2.1 LED
POWER LED (green)
❏ Lights when the power supply is on.
❏ Goes out when the power supply is turned off.
ERROR LED
Lights or flashes when the printer is offline.
❏ Lights after the power is turned on or after a reset (offline). Automatically goes out after a
while to indicate that the printer is ready.
Lights when the end of the roll paper is detected, and when printing has stopped (offline). If
this happens, replace with new roll paper.
❏ Flashes when an error occurs. (For details about the flash codes, refer to “Error Codes” (page
3-8).)
❏ Goes out during regular operation (online).
PAPER OUT LED
❏ Lights when there is no more roll paper or there is little remaining.
❏ Goes out when there is a sufficient amount of roll paper remaining.
❏ Flashes when a self-test is in progress or when the printer waits for a macro execution.
1.2.2.2 Buttons
PAPER FEED button
Pressing this button once feeds the roll paper by one line. Holding this button down feeds the
roll paper continuously.
1.2.3 Power Switch
The power switch is located at the bottom right front of the printer. (Refer to “Printer part
names” (page 1-3).)
Turn the printer on or off. The marks on the switch (0 = on / 1 = off) indicate the printer switch
position.
CAUTION:
Before turning on the printer be sure to check that the AC adapter is connected to the
power supply.
To Next Page
Loading...
Need help?
General