1-6 Product Overview Rev. A
1.3.2 Installing and Replacing Roll Paper
Note:
Be sure to use roll paper that meets printer specifications. See Appendix B for details on the paper
specifications.
Do not use roll paper whose trailing end is glued to the roll paper core.
1.3.2.1 Installing Roll Paper
1. Make sure the host has not sent a printing command to the printer, and press the cover open
button to open the printer cover. If the printer cover does not open, a probable cause is that
the autocutter is locked. If this happens, refer to “Paper jam.”
Figure 1-5 Cover open button
2. Load the roll paper.
Figure 1-6 Loading paper
Note:
When loading the roll paper, pay attention to the direction that the roll paper is fed out of the printer.
Figure 1-7 Paper direction
E
R
R
O
R
P
O
W
E
R
PAPER
OUT
FEED
To Next Page
Loading...
Need help?
General