Rev. A Product Specifications 5-3
TM-T88II/T88III Technical Reference Guide
5.3 Character Specifications (TM-T88II/TM-T88III)
Notes: 1. Spaces between characters not included.
2. Characters can be scaled up to 64 times as large as the standard size.
5.4 Paper Specifications (TM-T88II/TM-T88III)
See Appendix B.
Table 5-5 Character specifications
Item Specifications
Character type Alphanumeric 95 character sets
International TM-T88III: 37 types TM-T88II 32 types
Extended graphics TM-T88III: 128 characters × 11 pages (including 1 blank page)
TM-T88II: 128 characters × 7 pages (including 1 blank page)
Character configuration See table titled
“Character configurations and dimensions,” below
.
(Default is font A.)
Character dimensions See “Character configurations and dimensions,” below.
(Spaces between characters not included.)
Table 5-6 Character configurations and dimensions
Standard Double-height Double-width Double-width /
Double-height
W × H (mm) W × H (mm) W × H (mm) W × H (mm)
Font A (12 × 24) 1.41 × 3.39 1.41 × 6.77 2.82 × 3.39 2.82 × 6.77
Font B (9 × 17) 0.99 × 2.40 0.99 × 4.80 1.98 × 2.40 1.98 × 4.80
Kanji font (24 × 24) 3.39 × 3.39 3.39 × 6.77 6.77 × 3.39 6.77 × 6.77
To Next Page
Loading...
