Epson TM-C7500G series User Manual

128
•GS1 DataBar
 Module: Sets the module width for GS1 DataBar.
"Recommended value of the module" on page 129 for the recommended
value.
 Number of Characters:
Sets the maximum width for GS1 DataBar.
Set when GS1 DataBar Expanded Stacked is selected for the 2D symbol.
•AztecCode
 Type: Select a mode for AztecCode.
 Cell Size: Select the width of cell (module) for AztecCode.
"Recommended value of the module" on page 129 for the recommended
value.
 Number of Layers: Select the number of layers for AztecCode.
[Minimize]: Optimize the minimum number of layers automatically.
[Specify the Size]: Change the number of layers specified by the value in
the input box.
 Error Correction Area:
Specify the error correction area of AztecCode using of either the follow-
ing. The data can be read even if the part of the symbol is broken , and res-
toration ratio becomes higher for bigger numbers.
[Auto]:Default value is 23%+3 code words.
[Specify a Percentage]: Specify the error correction area with a percenta
ge
value in the input box.
•DataMatrix
 Symbol Shape: Set when "Rectangle" is selected for the sample shape of DataMatrix.
 Error Correction Level:
Select an error correction level for DataMatrix.
 Cell Size: Select the width of cell (module) for DataMatrix.
"Recommended value of the module" on page 129 for the recommended
value.
 Number of Vertical Cells:
Specify the number of cells for Dat
aMatrix in the vertical direction.
Set when "Rectangle" is selected for the sample shape of DataMatrix.
 Number of Horizontal Cells:
Specify the number of cells for DataMatrix in the horizontal direction. Set
when "Rectangle" is selected for the sample shape of DataMatrix.
[Minimi
ze]: Optimize the minimum number of cells automatically.
[Specify the Size]: Change settings to the selected size.
3
Click [Add].
The selected 2D symbol font is saved and the font name is added to the font list.
 The 2D symbol font can be registered up to 30.
 The 2D symbol font setting can be overwritten by clicking [Save] after selecting the font
name from the font list and changing the setting.
 The 2D symbol font setting can be deleted by clicking [Delete] after selecting the font name
from the font list.

Epson TM-C7500G series Specifications

General

Print Technology	Inkjet
Ink Type	Pigment-based ink
Connectivity	USB, Ethernet
Operating Systems Supported	Windows, macOS
Media Handling	Roll-fed
Ink Cartridge	Individual CMYK cartridges
Cutter	Auto cutter
Print Speed	Up to 11.8 inches/sec (300 mm/sec) at 360 x 360 dpi