Epson TM-C7500G series

179
Appendix
Printing Specifications
Printable Area
Print Speed
*1 dpi: dots per 25.4 mm (dots per inch)
*2 The maximum print speed is the maximum speed during printing, but excluding head cleaning,
autocutting, print job start/end processing and periodic flushing.
*3 The average print speed is the average speed during printing, including periodic flushing, but
excluding head clea
ning, autocutting and print job start/end processing.
Roll paper Minimum 46 mm {1.81”}, Maximum 108 mm {4.25”}
Fanfold paper Minimum 46 mm {1.81”}, Maximum 108 mm {4.25”}
During printing
Head
maintenance
mode
Input
resolution
*1
(width x
length)
Graphic
resolution
*1
(width x
length)
Flushing on
paper
Maximum
print
speed
*2
Average
printing
speed
*3
Continuous
Printing
600 x 600 dpi 600 x 1200 dpi Standard 300 mm/s
{11.81"/s}
150 mm/s
{5.91"/s}
300 mm/s
{11.81"/s}
150 mm/s
{5.91"/s}
Pause for
Maintenance
600 x 600 dpi 600 x 1200 dpi few 300 mm/s
{11.81"/s}
150 mm/s
{5.91"/s}
Around 220
mm/s {8.66"/s}
Around 110
mm/s {4.33"/s}
 Printing speed may slow down, depending on the data transmission speed.
 The average printing speed may be lower in high temperature conditions exceeding 35 C
{95 F}.