Epson TM-C7500G series User Manual

67
Chapter 2 Setup
2
Network settings
Set the IP address of the product following the steps below.
1
Turn on the product.
2
Press the (Menu) button to display the menu.
3
Select [I/F SETUP] and press the OK button.
4
Select [NETWORK SETUP] and press the OK button.
5
Select [IP ADDRESS] and press the OK button.
6
Select [AUTO] or [MANUAL].
When [AUTO] is selected, the network settings are complete.
When [MANUAL] is selected, go to Step 7 and set IP address, etc.
7
Select [IP ADDRESS] and press the OK button.
8
Enter the IP address.
Use the button to select a number and the buttons to
select the digit to be changed.
 When using the product with an Ethernet connection, it is necessary to setup the network.
When using with a USB connection, network settings are not necessary.
 When performing network settings, obtain the necessary information from a network
administrator.

Epson TM-C7500G series Specifications

General

Print Technology	Inkjet
Ink Type	Pigment-based ink
Connectivity	USB, Ethernet
Operating Systems Supported	Windows, macOS
Media Handling	Roll-fed
Ink Cartridge	Individual CMYK cartridges
Cutter	Auto cutter
Print Speed	Up to 11.8 inches/sec (300 mm/sec) at 360 x 360 dpi