177
Appendix
Appendix
Product Specifications
Printing method Line ink jet, dot matrix
4 color (KCMY) printing
Paper feed Forward and reverse friction feed
Autocutter Cutting method By separated-blade scissors
Auto-cut type Full cut (cuts paper completely)
Graphic resolution 600 dpi x 1200 dpi
Print speed 300 mm/s
150 mm/s
The print speed is different depending on the resolution
and the printing width.
Paper
(See "Paper
Specifications" on
page 180 for
details)
Media type TM-C7500 Plain label, Matte label, Synthetic label
TM-C7500G Glossy label
Media form Full-page label (Black mark),
Die-cut label (Gap)
Die-cut label (Black mark)
Media source Roll paper, Fanfold paper
Ink cartridge
(See "Ink Cartridge" on page 202 for details.)
4 color-ink separated exclusive ink cartridge
Interface Ethernet (1000BASE-T/ 100BASE-TX/ 10BASE-T)
USB 2.0 high speed
Barcode/
two-dimensional
code printing
Barcode UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), Code39, ITF,
Codabar(NW7), Code93, Code128, GS1-128,
GS1 DataBar Omnidirectional, GS1 DataBar Truncated,
GS1 DataBar Limited, GS1 DataBar Expanded
Two-dimensional code
printing
PDF417, QR Code, Maxi Code, GS1 DataBar Stacked,
GS1 DataBar Stacked Omnidirectional, GS1 DataBar
Expanded Stacked, DataMatrix, Aztec Code,
MicroPDF417, Micro QR Code
Power supply AC100 to 240V
Temperatures/
humidity
(See "Paper
Specifications" on
page 180 for
details.)
Printing
5 to 35 C, 20 to 80 %RH (no condensation)
Storage When packed (ink not loaded):
-20 to 60 C, 5 to 85 %RH (no condensation)
-20 C or 60 C: up to 120 hours
Ink loaded: -20 to 40 C
-20 C: up to 120 hours
0 to 25 C: up to 6 months
40 C: up to a month
To Next Page
Loading...
Need help?
General
