EasyManuals Logo

Epson TM-C7500G series User Manual

Epson TM-C7500G series
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
170
6
If the settings are changed properly, the following window is displayed.
Click [Finish].
7
Turn off this product's power and turn it on again.
For Ethernet interface
Setting the IP Address
Set the IP address of this product.
For the setting method, see "Network settings" on page 67.
Setting the printer resolution and monochrome print mode
Use the PrinterSetting to set the printer's resolution based on the resolution of the printer using ZPL
II commands. Also set your printer to monochrome print mode. For the setting method, see
"Replace settings from printer using ZPL II commands" on page 104.
Registering Preset Images
Use the PrinterSetting to register preset images.
Registering images
Set the images to be used in preset printing. See "Store data in the printer" on page 96.
Setting preset images
Set the preset images. For the setting method, see "Preset image" on page 98.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM-C7500G series and is the answer not in the manual?

Epson TM-C7500G series Specifications

General IconGeneral
Print TechnologyInkjet
Ink TypePigment-based ink
ConnectivityUSB, Ethernet
Operating Systems SupportedWindows, macOS
Media HandlingRoll-fed
Ink CartridgeIndividual CMYK cartridges
CutterAuto cutter
Print SpeedUp to 11.8 inches/sec (300 mm/sec) at 360 x 360 dpi

Related product manuals