171
Chapter 4 Application Development Information
4
Printing
Print in your actual usage environment and check the print result.
Adjusting Font Width
After checking the print result, if you want to adjust the character width of the printed item, you can
use PrinterSetting to perform adjustment. Display the "Replace settings from printer using ZPL II
commands" window and adjust the font width.
For the method to display the "Replace settings from pr
inter using ZPL II commands" window, see
"Replace settings from printer using ZPL II commands" on page 104.
If you want to change the height of characters or the space between lines, perform settings on
the application.
To Next Page
Loading...
