Epson TM-C7500G series User Manual

165
Chapter 4 Application Development Information
4
Application Development Information
This chapter describes the product's control method and necessary information for application
development using the product.
How to Control the Printer
Printer control methods vary depending on the customer's environment.
Using label printing application
Prints with a commercially available label printing application. Use a driver provided by the
application, and the Epson printer driver is not used.
The following label printing applications are supported.
•BarTender
•NiceLabel
• CODESOFT
How to get the application
Please contact the sales agent of each label printing application.
Specifications of application Controlling method Page
Use the label application and the printer driver
provided by the label application manufacturer.
Use the label application and the
printer driver of the label applica-
tion manufacturer.
page 165
Print using the Epson printer driver installed in the
setting up flow in Chapter 2.
Uses the Epson printer driver. page 110
Print from the customer's application developed
referring to the Epson Inkjet Label Printer SDK.
Uses the Epson Inkjet Label Printer
SDK.
page 166
The customer develops an application to directly
control ESC/Label command and print.
Uses the ESC/Label commands. page 166
Replace from the printer using ZPL II commands
without changing the existing applications or driv-
ers. Change from a pre-print system to an on-
demand print system.
Changes the printer settings and
replaces the printer.
page 167

Epson TM-C7500G series Specifications

General

Print Technology	Inkjet
Ink Type	Pigment-based ink
Connectivity	USB, Ethernet
Operating Systems Supported	Windows, macOS
Media Handling	Roll-fed
Ink Cartridge	Individual CMYK cartridges
Cutter	Auto cutter
Print Speed	Up to 11.8 inches/sec (300 mm/sec) at 360 x 360 dpi